USTR Grants First Round of Section 301 Tariff Product Exclusions

The Office of the United States Trade Representative (USTR) recently published a notice of product exclusions(1) related to the Section 301 tariffs that were imposed on certain product imports from China on July 6, 2018. The product exclusions apply as of July 6, 2018 and will extend for one year after the date of the publication of the exclusion notice (published on December 28, 2018).

The general and specific product exclusions that were granted are listed below:

(i) Linear acting steering actuators and cylinders: 8412.21.0075

(ii) Water Dispensers: 8418.69.0120

(iii) Injection molding tools: 8480.71.8045

(iv) Radial Bearings/ Radial Ball Bearings: 8482.10.5044

(v) Ball Bearings: 8482.10.5048

(vi) Ball Bearings: 8482.10.5052

(vii) Citizen Band Radios: 8525.60.1010

(viii) Spark-ignition engines for marine propulsion, outboard, each rated at not less than 29.83 kW but not more than 44.74 kW (described in statistical reporting number 8407.21.0080)

(ix) Welded hydraulic linear acting (cylinders) engines and motors, each with piston bore of 12.7 mm or more but not over 34.6 mm, with stroke not over 11.43 m, overall length not over 15.24 m and rod diameter not over 1.219 m (described in statistical reporting number 8412.21.0030)

(x) Stretchers of stainless steel, designed to move rollers to adjust tension of paper fabric to be dried, each with a pivoting arm with an actuator, linear rail movement with an actuator, and front and back units with mounting holes for tube roll bearing housings (described in statistical reporting number 8419.90.2000)

(xi) Roller machines with dies for embossing paper, manually powered (described in statistical reporting number 8420.10.9080)

(xii) Salad spinners of plastics, with capacity of at least 2.4 liters but not more than 3.8 liters (described in statistical reporting number 8421.19.0000)

(xiii) Nonelectric water filtration apparatus consisting of three cylinder-shaped filter cartridges, each measuring 6.35 cm by 26.67 cm, having water storage tank and plastic tubing measuring 0.63 cm or more but not over 0.95 cm, presented with installation kit (described in statistical reporting number 8421.21.0000)

(xiv) Winches, each having a winch frame with a corrosion resistant coating and stainless steel mandrel with nylon bushings, operated manually by a worm gear mechanism (described in statistical reporting number 8425.39.0100)

(xv) Elevators, comprising L-shaped steel buckets bolted to a steel chain, with guide rollers and a drive system (described in statistical reporting number 8428.32.0000)

(xvi) Belt conveyors, each comprising a frame with leveling feet, electric motor and food grade plastic conveyor belt (described in statistical reporting number 8428.33.0000)

(xvii) Belt conveyors, each comprising a welded frame with leveling feet and casters, electric motor and food grade plastic modular conveyor belt (described in statistical reporting number 8428.33.0000)

(xviii) Guards of stainless steel, designed to shield operators of papermaking machines from moving or rotating equipment, each with dimensions ranging from 30 cm by 30 cm by 50 cm to 50 cm by 50 cm by 4 m, weighing 30 kg or more but not over 100 kg (described in statistical reporting number 8439.99.1000)

(xix) Scrapers (“doctors”) of stainless steel, designed to scrape impurities from the rotating roll surface of the forming and press sections of papermaking machines, each comprising a beam with a blade of non-symmetrical cross section, long aspect ratio, and mounting journals and turning devices on either end, with dimensions ranging from 50 cm by 50 cm by 8 m to 60 cm by 6 m by 11 m, weighing 1 metric ton or more but not over 3 metric tons (described in statistical reporting number 8439.99.1000)

(xx) Frameworks of the forming and press section of papermaking machines, of stainless steel or cladded mild steel with stainless or acid proof steel, each with dimensions ranging from 1 m by 1 m by 1 m to 2.3 m by 2.3 m by 12 m, weighing 500 kg or more but not over 40 metric tons (described in statistical reporting number 8439.99.1000)

(xxi) Guides of stainless steel, designed for locating conveyer belts on papermaking machines, each with a moving arm with an actuator and front and back units with mounting holes for tube roll bearing houses, each with dimensions ranging from 40 cm by 50 cm by 30 cm to 1 m by 1 m by 50 cm, weighing 300 kg or more but not over 500 kg (described in statistical reporting number 8439.99.1000)

(xxii) Rollers of steel and cast iron (“nip rollers”) with bearing journals on either end, designed for use in paper manufacturing to mechanically compress paper web to remove water or impart desired mechanical properties in paper web, each with a polymer cover, the foregoing with length of 7 m or more but not over 12 m, with diameter of 1 m or more but not over 1.5 m, weighing 15 metric tons or more but not over 30 metric tons (described in statistical reporting number 8439.99.1000)

(xxiii) Open containers (“savealls”) of stainless steel, designed to catch water run off generated in the papermaking process, constructed of large square shaped plates and flat constructions with mounting holes on ends, each with dimensions ranging from 50 cm by 50 cm by 50 cm to 1.5 m by 1 m by 10 m, weighing 50 kg or more but not over 2 metric tons (described in statistical reporting number 8439.99.1000)

(xxiv) Stretchers of stainless steel, designed to move rollers of papermaking machines to adjust tension of fabric, each with a pivoting arm with an actuator, linear rail movement with an actuator and front and back units with mounting holes for tube roll bearing housings (described in statistical reporting number 8439.99.1000)

(xxv) Suction boxes of stainless steel, which remove water from paper web or papermaking fabrics during papermaking, each with dimensions ranging from 50 cm by 50 cm by 8 m to 1 m by 1 m by 10 m, weighing 1.5 metric tons or more but not over 2 metric tons (described in statistical reporting number 8439.99.1000)

(xxvi) Rollers of stainless steel or cast iron, designed for use in paper manufacturing to support and convey papermaking cloth (i.e. fabric) or the paper web, each weighing 7 metric tons or more but not over 20 metric tons, measuring 7 m or more but not over 12 m in length, with diameter of 40 cm or more but not over 1.5 m, presented with bearing journals on either end and a polymer cover (described in statistical reporting number 8439.99.1000)

(xxvii) Work stands designed to use with miter saws, each with metal tube frame, 4 metal legs and 2 metal extension arms (described in statistical reporting number 8466.92.5010)

(xxviii) Work stands designed for use with miter saws, each with wheels to make work stand mobile and with sides that fold up to extend the work area (described in statistical reporting number 8466.92.5010)

(xxix) Angle cock handle assemblies, of iron and steel, each measuring 11.43 cm by 21.59 cm by 5.08 cm and weighing 0.748 kg (described in statistical reporting number 8481.90.9040)

(xxx) Radiation therapy systems, each encased by steel-based structural shell with gantry cover comprising three pairs of plastics-based panels (described in statistical reporting number 9022.14.0000)

(xxxi) Thermostats designed for air conditioning or heating systems, not designed to connect to the internet, the foregoing designed for wall mounting (described in statistical reporting number 9032.10.0030)

Contact GCSG’s Trade Compliance professionals for more guidance and information.

References